Giới thiệu Micro thu âm chuyên nghiệp LEWITT LCT 550. Hàng nhập khẩu.
Micro thu âm LEWITT LCT 550 là micro thu âm condenser với hiệu suất cao, không bị biến dạng và âm thanh tự nhiên ấm áp.
Với tự tiếng ồn rất thấp và dải động rộng đảm bảo tái tạo âm thanh chi tiết trong bất kì thiết lập.
Được thiết kế để sử dụng trong các buổi biểu diễn trực tiếp cũng như ghi âm studio chuyên nghiệp.
The LCT 550 is the first and only large-diaphragm studio microphone ever to achieve 0 dB (A) self-noise*.
That makes it possible to capture even extremely weak signals with great precision and detail.
Features LEWITT LCT 550
- A perfect match – highly precise calibration of capsule and electronics means that any two microphones from this series will always form a matched pair at +/- 0 dB
- Precise transient response thanks to the 3-micron-thin, gold-layered, low-mass, 1-inch Mylar diaphragm
- Extraordinary sensitive: capture even extremely weak signals with great precision and detail
- Cardioid polar pattern for effective rear sound rejection
- 0 dB (A) self-noise from electronics and circuitry *
- 140 dB dynamic range Max. SPL of 155 dB (A)
- Immune to electromagnetic interference thanks to transformerless preamplifier circuitry
- Illuminated user interface for quick and easy handling in dark environments
- Noiseless pushbuttons for attenuation and low-cut selection
- Automatic Attenuation and Clipping History mode
- Rugged zinc die-cast body
- Internal shock mount for maximum reduction of structure borne noise
- Corrosion-resistant gold-plated 3-pin XLR output connector
Top applications LEWITT LCT 550
- Classical instruments and ensembles
- Ambitious stereo recording techniques (XY, ORTF, AB, )
- Vocals & background vocals
- Acoustic instruments (strings, guitars, piano and similar)
- Drum & percussion overhead
Tech data
Acoustical operating principle | pressure gradient transducer, externally polarized |
Diaphragm | 3 micron gold sputtered Mylar |
Transducer Ø | 25,4 mm / 1 inch |
Polar pattern | cardioid |
Frequency range | 20 to 20.000 Hz |
Sensitivity | 36 mV / Pa (-29 dBV), +/- 0 dB @ 1 kHz |
Signal / noise ratio | 91 dB (A) |
Equivalent noise level | 0 dB (A) self-noise from electronics and circuitry 3 dB (A) according to IEC 60268-1 due to Brownian motion |
Dynamic range of FET mic. Amp. | 140 dB (A) |
Max. SPL for 0,5 % THD | 143 dB, 0 dB pre-attenuation |
Pre-attenuation pad | 6 dB, 12 dB, switchable |
Low cut | 12 dB / octave at 80 Hz |
Rated impedance | < 150 ohms |
Rated load impedance | > 1.000 ohms |
Supply voltage | 48 V +/- 4 V |
Current consumption | 5,5 mA |
Enclosure | Zinc die cast |
Connector | gold plated 3-pin XLR |
Dimensions | 158 x 52 x 36 mm / 6,22 x 2,04 x 1,42 inch |
Net weight | 425 g / 14,9 oz |
Giá sản phẩm trên Tiki đã bao gồm thuế theo luật hiện hành. Tuy nhiên tuỳ vào từng loại sản phẩm hoặc phương thức, địa chỉ giao hàng mà có thể phát sinh thêm chi phí khác như phí vận chuyển, phụ phí hàng cồng kềnh, ...